Sensor Specifications - Dr. Suni Plus
| Technical data |
Size 0 |
Size 1 |
Size 2 |
| Sensor Dimensions (mm) |
32.5 x 25.6 |
39.5 x 26.0 |
43.5 x 31.5 |
| Active Area (mm) |
26.01 x 20.97 |
31.95 x 19.98 |
36.0 x 25.97 |
| Sensor Technology |
CCD |
CCD |
CCD |
| Maximum Gray Levels |
4096 |
4096 |
4096 |
| Sensor Cable |
9 feet (3m) |
9 feet (3m) |
9 feet (3m) |
| Cable Attachment |
Reinforced Strain Relief |
Reinforced Strain Relief |
Reinforced Strain Relief |
| USB Module |
USB 2.0 Module |
USB 2.0 Module |
USB 2.0 Module |
| Software |
Prof. Suni |
Prof. Suni |
Prof. Suni |
| Warranty |
3 years |
3 years |
3 years |
The sensor can be used with ordinary intraoral X-Ray sources with a maximum rating of 70 kV.
- Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 22 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
- Dose Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
- Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
- Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.
The sensor's body material and cable material are biocompatible. The sensors and all component materials
have been tested to comply with ISO standards, and specifically, the sensor complies with EN30993-1
(Biological Testing of Dental and Medical Devices).
The sensor must be stored and operated in at a temperature range between 10ºC and 40ºC.