Sensor Specifications - Dr. Suni Plus

Technical data Size 0 Size 1 Size 2
Sensor Dimensions (mm) 32.5 x 25.6 39.5 x 26.0 43.5 x 31.5
Active Area (mm) 26.01 x 20.97 31.95 x 19.98 36.0 x 25.97
Sensor Technology CCD CCD CCD
Maximum Gray Levels 4096 4096 4096
Sensor Cable 9 feet (3m) 9 feet (3m) 9 feet (3m)
Cable Attachment Reinforced Strain Relief Reinforced Strain Relief Reinforced Strain Relief
USB Module USB 2.0 Module USB 2.0 Module USB 2.0 Module
Software Prof. Suni Prof. Suni Prof. Suni
Warranty 3 years (sensor)
1 year (USB)		 3 years (sensor)
1 year (USB)		 3 years (sensor)
1 year (USB)

Usable Intraoral X-ray Sources

The sensor can be used with ordinary intraoral X-Ray sources with a maximum rating of 70 kV.

X-Ray Imaging Properties

  • Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 22 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
  • Dose Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
  • Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
  • Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.

Sensor Material Biocompatibility Specifications

The sensor's body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).

Sensor Storage Requirements

The sensor must be stored and operated in at a temperature range between 10°C and 35°C.

Back to Dr. Suni Plus